ASI 10-0351 Wall Mount, Push Button, Soap Dispenser, Liquid Type Type, Stainless Steel Housing
Stainless steel housing with mirror finish and removable plastic globe, concealed mounting. Used for viscous lotion soaps, and synthetic detergents.
>Capacity: 12 ounces (0.4 L)
>Soap Requirements: Proper usage of this dispenser requires, that only soap within the following range for viscosity and pH may be used.
>Viscosity Range (mPa·s or cP): 50 – 3500
>pH Range: 5.5 ~ 8.5
| Mount: | Wall / Surface |
| Operation: | Push Button |
| Cover Material: | Stainless Steel |
| Power: | None |
| Soap Type: | Liquid soap, lotion, or detergent having a pH in range 7 ± 1.5 and viscosity in range 1-3000 cP (mPa•s). |
| Capacity: | 12 oz. |
| Dispense Amount: | Not published |
| Overall Dimensions: | 3-5/32" Wide x 6-1/2" Tall x 6-3/16" Deep |
| Net Weight: | 1.7 lbs. |
| Shipping Dimensions: | 8" Length x 7" Width x 4" Height |
| Shipping Weight: | 1.9 lbs. |
| Warranty: | Warranted to be free from initial defects in material and workmanship for a period of one (1) year from date of invoice. |
| UPC / GTIN: | Not published |
| Country of Manufacture: | Not published Buy American Act compliant |
| Comments: | Refill unit by unlocking filler cap using the service key provided. (Note: This is not the standard E114 key, but rather a key with two pin prongs . Special order part: ASP-10-L-19) |
Architectural Specifications:
Surface Mounted Liquid Soap Dispenser shall dispense 12 oz (0.4 L) of liquid soap, lotion or detergent having a pH in range 7 ± 1.5 and viscosity in range 50-3500 cP (mPa•s). Soaps containing reportable salts, chlorides and alcohols should be avoided. Housing shall be type 304 stainless steel alloy 18-8. Housing shall have four (4) top to bottom viewing slots and shall hold a removable plastic globe. Filler cap shall be chrome plated die-cast Zinc and be chained to housing. Valve shall be chrome-plated brass body with stainless steel and plastic internal parts. Valve operation shall comply with 2010 ADA Accessibility Standards and ICC/ANSI A.117.1 by requiring no more than 5 lbsf (22.2 N) pressure to actuate and require no grasping or twisting by operator. All exposed metal surfaces shall be bright finish.