ASI 10-0457-2 Multi/C-Fold Paper Towel Dispenser, Semi-Recessed Mount, Stainless Steel
Dispenses 350 C-fold or 475 multi-fold paper towels; well-suited for smaller washrooms with less space and traffic.
Unit is semi-recessed with a 2″ collar.
Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed properly.
| Type: | C-Fold / Multi-Fold Paper Towel Dispenser |
| Primary Material: | Stainless Steel |
| Color / Finish: | Satin (Brushed) |
| Installation Type: | Wall / Recessed |
| Capacity: | 350 C-Fold | 475 Multifold |
| Power: | No power required |
| ADA Compliant: | Yes |
| Overall Dimensions: | 12-3/4" Wide x 17-1/4" Tall x 4-1/4" Deep (Projects 2-1/4" out from wall) |
| Rough-In: | 11-1/4" Wide x 15-3/4" Tall x 2" Deep |
| Shipping Dimensions: | 21" Length x 16" Width x 6" Height |
| Shipping Weight: | 10.1 lbs. |
| Manufacturer Model No.: | 10-0457-2 |
| UPC / GTIN: | Not published |
| Country of Manufacture: | Not published Buy American Act compliant |
| Warranty: | Warranted to be free from defects in material and workmanship for a period of one (1) year from date of invoice. |
| Additional Comments: | Tumbler lock uses ASI key: E-114. |
Architectural Specifications:
Semi-Recessed Paper Towel Dispenser shall hold and dispense 475 standard multi-fold or 350 standard C-fold paper towels. Towel dispenser, door, frame and cabinet shall be fabricated of alloy 18-8 stainless steel, type 304, 22 gauge. Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety. Dispenser door shall be fabricated in double-pan construction with fiberboard filler and shall be attached to the unit with a full length 3/16′′(5mm)dia. stainless steel multistaked piano hinge and be held closed with tumbler lock keyed alike to other ASI washroom equipment. Face trim shall be 1′′ (25mm) wide formed from one piece with no miters, welding or open seams and have 1/4′′ (6.35mm) square return to wall. Structural assembly of all components shall be of welded construction. All exposed surfaces shall be No 4 satin finish and be protected during shipment with a PVC film easily removable after installation. Unit shall be supplied with SR collar to convert to semi-recess mounting.