ASI 10-04684-TM-25 Napkin & Tampon Vendor, Wall Mount/ Recessed Mount, 25¢ Operation (15N/23T)
Dispenses 15 napkins, 23 tampons of specified sizes and has a waste capacity of 1.9 gal (7.2 liters). Doors are held closed with two (2) tumbler locks. Internal coin-box is keyed differently than door locks. Dispensing mechanisms are fastener mounted internally to provide ability to change mechanisms for coinage denomination. Weights for each feed track are supplied.
Allows for 25¢ operation
| Cover Material: | 18 Gauge Type 304 Stainless Steel Alloy 18-8 |
| Mount: | Wall / Recessed |
| Operation: | Deposit of specified coin allows operation of dispenser. Napkin and tampon dispensers operate independently. Selected product drops into vending opening after operator actuation. Indicator displays empty condition and blocks coin slot when product is depleted. |
| Denomination: | 25 cents (one quarter) |
| Capacity: | 15 Sanitary Napkins and 23 Tampons of specified sizes |
| Waste Bin Capacity: | 1.9 Gal. |
| Overall Dimensions: | 43-3/8" Tall x 17-1/4" Wide x 4-1/2" Deep (Projects 1/2" out from wall.) |
| Rough-In: | 16" Wide x 42" Tall x 4" Deep |
| Net Weight: | 39.7 lbs. |
| Shipping DImensions: | 30" Length x 20" Width x 7" Height |
| Shipping Weight: | 42.7 lbs. |
| Comments: | Unit vend product supply is replenished on cycle determined by maintenance needs by opening door and manually reloading product into dispenser supply tracks. Track weights MUST BE USED to provide positive feed. |
Architectural Specifications:
Sanitary Napkin / Tampon Vendor / Disposal shall dispense 15 napkins and 23 tampons of specified sizes and shall have a waste capacity of 1.9 gal (7.2 liters). Unit shall be fabricated of alloy 18-8 stainless steel, type 304, 18 gauge; all exposed surfaces shall have No 4 satin finish and be protected during shipment by PVC film easily removable after installation. Cabinet door shall be attached to frame with a full length 3/16"dia. (5mm) stainless steel multi-staked piano hinge and shall be held closed with three (3) tumbler locks keyed alike to other ASI washroom equipment. Internal coin-box shall be keyed differently than door locks. Waste disposal door shall be attached to cabinet with a stainless steel spring hinge and have the international waste symbol on face. Waste container shall be fabricated of stainless steel same as above, 22 gauge. Dispensing mechanisms shall be fastener mounted internally to provide ability to change mechanisms for coinage denomination. Structural assembly of body and door components shall be of welded construction and have no exposed fasteners or welded seams. Weights for each feed track shall be supplied. Factory installed coin operation denomination shall be ____________(please fill in 25¢ or 50¢ or FREE ) and add denomination as suffix to model No (ie: 04684-TM-25)).