ASI 10-0473-1 Recessed Locking, Sanitary Napkin Disposal, 1.5 Gallon
Self-closing door is mounted to cabinet with stainless steel spring hinge. Recessed for side wall installation. Holds 1.5 gal (5.7liters) of dry/solids waste.
Includes tumbler lock for servicing.
Users push door to deposit waste material. Door is self-closing. Maintenance schedule determines waste removal cycle. Unit is emptied by removing bottom waste container and inverting over collection bag. Waste container is captured by internal angle and lock to prevent inadvertent dumping , unauthorized removal and safety-edged finger grip provides convenient grip for service.
| Mount: | Wall / Recessed |
| Primary Material: | Stainless Steel |
| Capacity: | 1.5 Gal. |
| Lid or Cover: | Yes, swing-in door |
| Locks: | Yes |
| Overall Dimensions: | 13" Wide x 17-1/4" Tall x 4-1/4" Deep (Projects 1/4" out from wall) |
| Rough-In: | 11-1/4" Wide x 15-3/4" Tall x 4" Deep |
| Net Weight: | 7.5 lbs. |
| Shipping Dimensions: | 18" Length x 14" Width x 6" Height |
| Shipping Weight: | 7.7 lbs. |
| Warranty: | Warranted to be free from initial defects in material and workmanship for a period of one (1) year from date of invoice. |
| UPC / GTIN: | Not published |
| Country of Manufacture: | Not published Buy American Act compliant |
| Comments: | Unit is emptied by removing bottom waste container and inverting over collection bag. Waste container is captured by internal angle to prevent inadvertent dumping and key lock to prevent unauthorized access or removal. Mounting fasteners not included. |
Architectural Specifications:
Recessed Sanitary Napkin Disposal with locking waste receptacle shall hold 1.5 gal (5.7liters) of dry/solids waste and shall have doors and cabinet fabricated of alloy 18-8 stainless steel, type 304, No 22 gauge. Structural assembly of body and door components shall be of welded construction. Upper door shall be hung on cabinet with a stainless steel spring hinge and have the international napkin disposal symbol on face. Waste container shall be retained by internal angle and lock keyed alike to other ASI Washroom Equipment and have safety edge finger grip. All exposed surfaces shall have a No 4 satin finish and be protected during shipment with a PVC film that shall be easily removable after installation. Face trim shall be of one piece construction 1" (25.4mm) wide with no welded miters and shall have square 1/ 4" (6.35mm) returns.