ASI 10-04823 Recessed Toilet Tissue Dispenser & Sanitary Napkin Disposal, Stainless Steel
Similar to 04813 for end stall installation.
Holds two (2) rolls standard or 1800 sheet 4-1/2″ x 5-1/4″ diameter (114 x Ø133) toilet paper. Removable waste container has a capacity of 1.3 gal (4.9 liters) or 300 in3 (.005 m3 ).
Cabinet door is held closed with tumbler lock. Cabinet also includes theft and vandal resistant rollers molded of high-impact resistant plastic with integral molded-in stainless steel endpins and two (2) rollers [p/n R-004] are supplied.
| Cover Material: | Stainless Steel |
| Mount: | Wall Mount / Recessed |
| Dispensed Items: | Toilet Paper |
| Capacity: | Holds 2 standard rolls up to 5-1/4" diameter (1800 sheets) |
| Waste Bin Capacity: | 1.3 Gal. |
| Locks: | Yes |
| Overall Dimensions: | 17-3/8" Wide x 20" Tall x 4-1/4" Deep |
| Rough-In: | 15-3/4" Wide x 18-3/8" Tall x 4" Deep |
| Net Weight: | 10.6 lbs. |
| Shipping Dimensions: | 22" Length x 19-3/4" Width x 6" Height |
| Shipping Weight: | 12.6 lbs. |
| Comments: | Push self-closing disposal door to deposit waste material. Toilet paper rolls feed freely until depleted and level of supply is constantly visible for low-level warning. Toilet paper rolls and waste receptacle are serviced by unlocking and opening door. |
Architectural Specifications:
Recessed Toilet Tissue Dispenser and Napkin Disposal Unit shall hold and dispense two rolls standard or 1800 sheet 4-1/2" x 5-1/4" diameter (114 x Ø133) toilet paper. Removable waste container shall have a capacity of 1.3 gal (4.9 liters) or 300 in3 (.005 m3 ). Toilet paper dispenser door and waste disposal door shall be fabricated of 18 gauge type 304 stainless steel alloy 18-8. Face frame and cabinet shall be 22 gauge. All exposed surfaces shall have No 4 satin finish and be protected by PVC film easily removed after installation. Disposal door shall be hung on spring-tensioned hinges and shall have international graphic waste disposal symbol. Toilet paper dispenser/disposal door shall be attached to cabinet at side with a full-length 3/16" diameter (Ø5) stainless steel multi-staked piano hinge and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment. Face trim shall be 1" (25) wide formed from one piece with no miters, welding or open seams and have 1/4" (6) square return to face of wall. Structural assembly of all components shall be of welded construction. Cabinet shall include theft and vandal resistant rollers that shall be of molded highimpact resistant plastic with integral molded-in stainless steel endpins and two (2) rollers [p/n R-004] shall be supplied.