ASI 10-1200-SHU Stainless Steel Wire Shower Curtain Rings (for 1" & 1-1/4" Rods)
Solid formed wire is .098″ diameter (Ø2.5) with a bright finish. Hook has a formed retainer to hold free end closed and accommodates 1″ to 1-1/4″ diameter (Ø25 to Ø32) curtain rods.
Grasping hook in both hands, use the thumb of one hand to push the hanger hook in and to one side. Release thumb pressure allowing top hook to bypass and extend over the bottom hook. Slip the hook over the shower curtain rod (specified separately). After hanging shower curtain (specified separately) use thumb pressure to replace the free leg of the hook onto the bottom hook leg-retainer.
Grasping hook in both hands, use the thumb of one hand to push the hanger hook in and to one side. Release thumb pressure allowing top hook to bypass and extend over the bottom hook. Slip the hook over the shower curtain rod (specified separately). After hanging shower curtain (specified separately) use thumb pressure to replace the free leg of the hook onto the bottom hook leg-retainer.
| Primary Material: | Stainless Steel |
| Finish: | Polished |
| Dimensions: | Solid formed wire: 0.098" dia. 1-9/16" Wide x 2-5/8" Tall |
| Compatible Rod Size: | 1" to 1-1/4" O.D. Rods |
| Rings Needed: | For a 42" wide curtain, use 7 rings For a 60" wide curtain, use 10 rings For a 72" wide curtain, use 12 rings For a 84" wide curtain, use 14 rings |
| Weight: | 0.1 lbs. |
| UPC / GTIN: | Not published |
| Country of Manufacture: | Not published Buy American Act compliant |
| Comments: | To Install: Open hook and slip over shower curtain rod (specified separately). Hang shower curtain (specified separately) on small hook. Close hook free end into retainer on hook end. |
Architectural Specifications:
Shower Curtain Hook shall be fabricated of type 304 stainless steel alloy 18-8. Solid formed wire shall be .098" diameter (Ø2.5) with a bright finish. Hook shall have a formed retainer to hold free end closed and shall accommodate 1" to 1-1/4" diameter (Ø25 to Ø32) curtain rods.