ASI 10-6452-9 Surface Mount, Multi/C-Fold Paper Towel Dispenser, Stainless Steel (600C/800M)
Holds and dispenses 600 C-fold or 800 multi-fold paper towels. Door held closed with a tumbler lock. All exposed surfaces have a No 4 satin finish.
Surface mounted with 9″ stainless steel collar.
Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed properly. Locking door prevents unauthorized access or removal.
| Type: | C-Fold / Multi-Fold Paper Towel Dispenser |
| Primary Material: | Stainless Steel |
| Color / Finish: | Satin (Brushed) |
| Installation Type: | Wall / Surface |
| Capacity: | 600 C-Fold or 800 Multi-Fold Paper Towels |
| Power: | No power required |
| ADA Compliant: | No (Projects > 4" out from wall) |
| Overall Dimensions: | 14-1/4" Wide x 28" Tall x 4-1/2" Deep |
| Rough-In: | Not Applicable |
| Shipping Dimensions: | 32" Length x 18" Width x 6" Height |
| Shipping Weight: | 20.3 lbs. |
| Manufacturer Model No.: | 10-6452-9 |
| UPC / GTIN: | Not published |
| Country of Manufacture: | Not published Buy American Act compliant |
| Warranty: | Warranted to be free from defects in material and workmanship for a period of one (1) year from date of invoice. |
| Additional Comments: | Tumbler lock uses ASI key: E-114. |
Architectural Specifications:
Surface Mounted Paper Towel Dispenser shall hold and dispense 800 standard multi-fold or 600 standard C-fold paper towels. Cabinet, door, skirt and dispenser shall be fabricated from alloy 18-8 stainless steel, type 304. Full face door shall be 18 gauge formed from one piece with no miters, welding or open seams on face with a 1/2" (13mm) return to wall and shall be attached to cabinet at side with a full length 3/16" (5mm) stainless steel multi-staked piano hinge and be held closed with a tumbler lock keyed like other ASI washroom equipment. Cabinet shall be 20 gauge and skirt shall be 22 gauge. Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety. Structural assembly of all components shall be of welded construction. All exposed surfaces shall be No 4 satin finish and shall be protected during shipment with a PVC film easily removable after installation. Unit shall be supplied with SM collar (skirt) to convert to surface mounting.