ASI 10-64672-2 Simplicity Combo High Speed Hand Dryer, Paper Towel Dispenser & Trash Bin 220-240V
This all-in-one unit combines an automatic, high-speed hand dryer, a 400 C-fold paper towel dispenser, and a 6.8 gal waste receptacle with spring closed lid. Key-lock door prevents unauthorized access to paper towel dispenser or removal of waste bin.
Certifications:
Measurement Diagram:
| Reported Dry Time: | 15-18 Seconds |
| Mount: | Wall / Recessed |
| Cover: | Stainless Steel, Brushed Finish |
| Nozzle: | Fixed outlet grill |
| Activation: | Automatic (infra-red) hands-free (self calibrating) |
| Power: | 1000 Watts, 220-240V (4.17A), 50/60Hz |
| Motor: | Brush type, dual ball bearings |
| Fan: | Multi-Inlet Centrifugal |
| Airspeed: | 60 CFM, 230 ft/s |
| Reported Sound Level: | 68.9-74.3 dB-A @ 2M |
| Heating Element: | 325~450 W Nichrome wire with auto reset circuit breaker and thermostat adjustable by owner |
| Filter: | None |
| IP Rating: | Not published |
| Product Dimensions: | 15-3/8" Wide x 55-3/8" Tall x 7-1/2" Deep (7" Recessed) |
| Product Weight: | 59 lbs. |
| Shipping Dimensions: | 60" Length x 17" Width x 9" Height |
| Shipping Weight: | 64 lbs. |
| UPC / GTIN: | Not published |
| Manufacturer's Part No.: | 10-64672-2 |
| Country of Manufacture: | Taiwan |
Architectural Specifications:
Recessed Combo 3-in-1 Paper Towel Dispenser with Waste Receptacle and Provision for Automatic Electric Hand Dryer (by others) shall hold and dispense 500 standard multi-fold or 400 standard C-fold paper towels and shall have a waste capacity of 6.8 gal (26L). Dispensing of multi-fold or C-fold paper towels shall not require an additional adapter. Cabinet, door, dispenser and waste receptacle (WR) shall be type 304 stainless steel alloy 18-8. All exposed surfaces shall be satin finish (or Powder Coated (PC) Matte Black finish if suffix -41PC is added to Model №) and shall be protected during shipment by PVC film easily removable after installation. Cabinet shall be 20 gage with a 5/8" [16] wide perimeter trim to lay flush against wall and shall have no exposed fastening devices or visible seams. Full-face door shall be 18 gage, fabricated from one piece with no miters or seams on face and shall have 1/2" [13] square returns to the wall. Door shall be attached to cabinet body with a full length 3/16" Dia [Ø4,8] stainless steel multi-staked piano hinge and shall be held closed with two (2) tumbler locks keyed alike to other ASI washroom equipment. Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety. WR shall have piano-hinge mounted closed top with spring-hinge closed flap door and hemmed edges for safety. Structural assembly of all cabinet components shall be of welded construction. Hand Dryer (by others) shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone.