ASI Piatto™ 10-645210A-00 Recessed Auto Towel Dispenser, White
 | Completely FLUSH mount. No projection!" IMPORTANT: As this product is made to order, the manufacturer does not allow returns or cancellations once production has started. |
- Dispenser is powered by (4) D-size batteries (not supplied)
Certifications:
Measurement Diagram:
Alternatives:
Need it in Black? See ASI Piatto® 645210A-41 .
Want the same unit, but with an AC adapter instead of batteries? See the ASI Piatto® 6465210AC-00 2-in-1 .
| Type: | Automatic, Roll Type Commercial Paper Towel Dispenser |
| Primary Material: | Phenolic Facia, Stainless Steel Frame |
| Color / Finish: | White |
| Installation Type: | Wall / Recessed |
| Capacity: | One 8" Dia., 8" Wide Roll One 4" Dia. 8" Wide Stub Roll |
| Power: | Battery Operated, D-Cell Batteries, 4 |
| ADA Compliant: | Yes |
| Overall Dimensions: | 16-1/16" Wide x 28" Tall x 9-3/4" Deep |
| Rough-In: | 16-1/8" Wide x 28-1/16" Tall x 10" Deep |
| Shipping Dimensions: | 31" Length x 19" Width x 12-1/2" Height |
| Shipping Weight: | 38 lbs. |
| Manufacturer Model No.: | 10-645210A-00 |
| UPC / GTIN: | Not published |
| Country of Manufacture: | Not published Buy American Act compliant |
| Warranty: | Warranted to be free from defects in material and workmanship for a period of one (1) year from date of invoice. |
| Additional Comments: | No cabinet lock. |
| Manufacturer Model No.: | 645210A-00 |
| Made In: | USA |
| Warranty: | 1 Yr. manfuacturer's limited warranty |
Architectural Specifications:
Piatto™ Collection Automatic Paper Towel Dispenser shall hold and dispense one 8" wide [203] x 8" Dia. [Ø203] x standard towel roll up to 800 ft. (244m) long and one 8" wide [203] stub roll up to 4" Dia. [Ø102] and shall automatically change over to main roll when finished with stub roll when feed tabs are properly engaged. Automatic Touchless Roll Towel Dispenser shall be powered by four (4) D-size batteries (not supplied) and shall operate automatically to activate towel dispensing when hands are placed in sensor zone from 1/2" [13] below sensor to 4- 1/2" [114] below sensor. At each activation unit shall feed out a length of towel selected by owner by setting length, delay and paper saver switches. Unit shall have an internal towel cut-off bar. Towel dispensing opening shall have a fully deburred edge for snag free dispensing and user safety. Frame and cabinet shall be 20 gage type 304 alloy 18-8 stainless steel and shall have no exposed fastening devices. Flush face door shall be 1/2" [13] thick black edged Phenolic with matte black (Formica 909-58) or white (Formica 949) outer and inner surfaces as chosen by tail code on model number. Door shall be attached to the side of cabinet with two (2) zero-clearance concealed cabinet hinges and shall be held closed with a spring-pin L-latch. Structural assembly of all components shall be of welded construction. Door, latch and hinges shall be attached with concealed Philips head screws. OM & IG shall be packed with unit. Installation set-back gage and depth stops shall be provided.