ASI Piatto™ 10-64696A-41 Recessed Auto Towel Disp & Waste Bin, Black
Completely FLUSH mount. No projection! IMPORTANT: As this product is made to order, the manufacturer does not allow returns or cancellations once production has started. |
- Dispenser is powered by (4) D-size batteries (not supplied)
- Waste receptacle has a capacity of 9.9 gallons (37.3 L) and is emptied manually
Certifications:
Measurement Diagram:
Alternatives:
Need it in White? See ASI Piatto® 64696A-00 .
Want the same unit, but with an AC adapter instead of batteries? See the ASI Piatto® 64696AC-41 2-in-1 .
Type: | Automatic, Roll Type Commercial Paper Towel Dispenser with Integrated Waste Container |
Primary Material: | Phenolic Facia with Stainless Steel Frame |
Color / Finish: | Black |
Installation Type: | Wall / Recessed |
Capacity: | Paper Towels: 1 Std Commercial-Type PT Roll plus 4" Stub Roll |
Waste Bin Capacity: | 9.9 Gal. |
Power: | Battery Operated, D-Cell Batteries, 4 |
ADA Compliant: | Yes |
Overall Dimensions: | 16-1/16" Wide x 41-1/4" tall x 10-1/4" Deep |
Rough-In: | 16-1/8" Wide x 41-5/16" Tall x 10-5/8" Deep |
Shipping Dimensions: | 44-1/4" Length x 19-1/16" Width x 13" Height |
Shipping Weight: | 60.3 lbs. |
Manufacturer Model No.: | 10-64696A-41 |
UPC / GTIN: | Not published |
Country of Manufacture: | Not published Buy American Act compliant |
Warranty: | Warranted to be free from defects in material and workmanship for a period of one (1) year from date of invoice. |
Additional Comments: | Cabinet does not lock. |
Made In: | USA |
Warranty: | 1 Yr. manfuacturer's limited warranty |
Architectural Specifications:
Piatto™ Collection Automatic Paper Towel Dispenser and Waste Receptacle shall hold and dispense one 8" wide [Ø203] x 8" Dia. [Ø203] standard towel roll up to 800 ft. (244m) long and one 8" wide [203] stub roll up to 4" Dia. [Ø102] and shall automatically change over to main roll when finished with stub roll when feed tabs are properly engaged. Waste receptacle shall have a capacity of 9.9 gallons (37.3 L). Automatic Touchless Roll Towel Dispenser shall be powered by four (4) D-size batteries (not supplied) and operate automatically to activate towel dispensing when hands are placed in sensor zone from 1/2" [13] below sensor to 4-1/2" [114] below sensor. At each activation unit shall feed out a length of towel selected by owner by setting length, delay and paper saver switches. Unit shall have an internal towel cut-off bar. Towel dispensing opening shall have a fully deburred edge for snag free dispensing and user safety. Frame and cabinet shall be 20 gage type 304 alloy 18-8 stainless steel and shall have no exposed fastening devices. Flush face door shall be 1/2" [13] thick black edged Phenolic with matte black (Formica 909-58) or white (Formica 949) outer and inner surfaces as chosen by tail code on model number. Door shall be attached to the side of cabinet with four (4) zero-clearance concealed cabinet hinges and shall be held closed with a spring-pin L-latch. Structural assembly of all components shall be of welded construction. Door, latch and hinges shall be attached with concealed Philips head screws. OM & IG shall be packed with unit. Installation set-back gage and depth stops shall be provided.