Bobrick B-9882 Ligature Resistant Semi-Recessed Toilet Paper Holder
 | This paper holder is designed for standard toilet paper rolls that are between 4-3/8" and 4-1/2" wide. Not compatible with other sizes. |
Secured from the front. Type 304 satin-finish stainless steel. Back plate is 14-gauge (2mm). Hook snaps down for safety if excessively loaded. Back plate 4" W x 4" H x 7/8" D (102 x 102 x 22mm) Ligature Resistant (LR) semi-recessed toilet tissue holder shall be 16-gauge, type 304 stainless steel with all exposed surfaces powder coated white. Unit shall dispense one standard-core toilet tissue roll up to 4-1/2" (114mm) diameter. Spring loaded buttons are designed to release toilet tissue deter use as a point of ligature.
Paper holder housing fabricated from 16-gauge, type 304 stainless steel
Units hold one toilet tissue roll between 4-3/8" and 4-1/2" wide in diameter
Installation required a rough wall opening approximately 7-1/4" X 6-1/4" x 3" deep to accommodate tissue paper holder
Spring loaded buttons are designed to release toilet tissue deter use as a point of ligature
Measurement Diagram:
| Brand: | Bobrick |
| Manufacturer Model No.:: | B-9882 |
| Primary Material: | Type 304 Stainless Steel |
| Color | Finish: | White Powder Coated |
| Mount: | Wall / Recessed |
| Configuration: | Spindle-less LR (ligature resistant) recessed dispenser |
| Capacity: | one standard toilet paper roll between 4-3/8" and 4-1/2" wide in diameter. |
| Delivery: | Unrestricted |
| Spindle: | None (spring loaded buttons on the sides hold roll in place). |
| Overall Dimensions: | 9" Wide x 7-5/8" Tall x 3-5/8" Deep (Projects 3/4") |
| Rough-in: | 7-1/4" Wide x 6-1/4" Tall x 3" Deep |
| Shipping Dimensions: | Approximately 10" Length x 9" Width x 5" Height |
| Shipping Weight: | Not published |
| UPC / GTIN: | Not published |
| Country of Manufacture: | Not published |
| Warranty: | 1 Year Manufacturer's Limited |
| Additional Comments: | Mounting hardware not included. |
Architectural Specifications:
Semi-recessed toilet tissue holder shall be 16-gauge, type 304 stainless steel with all exposed surfaces powder coated white. Unit shall dispense one standard-core toilet tissue roll up to 4-1/2" diameter. Spring loaded buttons are designed to release toilet tissue deter use as a point of ligature.