Bobrick B-3706-25 ClassicSeries, Recessed (or Semi-Recessed), Satin Stainless Steel, 25-cent Operation, Push-Button, Sanitary Napkin/Tampon Vendor (20N/30T)
Adjustable beveled flange for fully-recessed installation in 6″ deep walls or semi-recessed installation in 4″ to 6″ deep walls, satin-finish stainless steel. Push-button operation, less than 5 lbs of force, no grasping, pinching or twisting of the wrist. Easy access Product tray. Single-coin slots are key to jam-resistant operation. Accepts one quarter (U.S. or Canadian). Push-button coin return cancels selection. Returned coins or wrong coins (1₵, 5₵,10₵) by-pass mechanism and drop into Product tray. Empty Product indicator automatically blocks coin slot. Easy product loading, no weights. Holds 30 tampons, 20 napkins. Two tumbler door locks keyed like other Bobrick accessories. Separately-keyed coin box lock for management access. Easy 25₵ to 50₵, Token or Free field coin conversion. type-304 satin-finish stainless steel on exposed surfaces. Patented.
Measurement Diagram:
| Primary Material: | Stainless Steel |
| Color/Finish: | Satin |
| Installation Type: | Recessed or Semi-Recessed |
| Capacity: | 20 Sanitary Napkins or 30 Tampons |
| Operation: | Push Button, 25-cent |
| Power: | Mechanical (No Power Required) |
| Rough-In: | 12 - 1/2" Wide x 26 - 3/8" Tall x Minimum of 4" to 5 - 1/2" Deep |
| Overall Dimensions: | 13 - 7/8" Wide x 27 - 7/8" Tall x 7 - 15/16" Deep |
| Net Weight: | 27.9 lbs |
| Shipping Dimensions: | 30.8" Length x 18.3" Width x 12" Height |
| Shipping Weight: | 27.9 lbs |
| Manufacturer Model No.: | B-3706 25 |
| UPC / GTIN: | 716954009456 |
| Country of Manufacture: | United States |
| Warranty: | 1 Yr. Manufacturer's Limited |
| Additional Comments: | Uses Bobrick Key 330-43 (Door), Bobrick Key: 352-112 (Coinbox) |
Architectural Specifications:
Recessed or Semi-Recessed napkin/tampon vendor shall combine two dispensing mechanisms in one cabinet to provide sanitary napkins and tampons at user’s option. Mechanical operations; no batteries or electricity required. Dispensing mechanisms shall be pre-set at factory for _______________ (insert one: Free, 25¢ or Token) operation, but shall be convertible in the field to allow the change of coin denomination without removing unit from wall. Door shall be furnished with graphics indicating specified coin denomination. Unit shall be Type-304 stainless steel with all-welded construction; exposed surfaces shall have #4 satin finish. Adjustable escutcheon type flange shall permit semi- or fully recessed installation. Door shall be 18 gauge (1.2mm); have three 90° return edges and bottom edge hemmed; be secured to cabinet with a concealed, full-length stainless steel piano hinge; and equipped with two tumbler locks keyed like other Bobrick washroom accessories. Vendor product selection and coin return pushbutton-operation shall be certified ADA-ABA, ICC/ANSI A117.1 complaint by third party (certification available on request) for operation with one hand with less than 5 pounds of force (22.2 N) without tight grasping, pinching or twisting of the wrist. Push-Button coin return shall cancel selection and return coin into product tray. Wrong coins (penny, nickel, dime) shall by-pass mechanisms and drop into product tray. Product tray shall be impact-resistant PC-ABS plastic and provide easy access to dispensed product. Coin Box shall be equipped with a tumbler lock that is keyed differently than door locks. Unit shall not carry brand-name advertising.
Product Group Variations:
Ratings & Reviews
1 review
Push button is better
by Robert -
We installed these at a community center. We got a couple of these because they use buttons instead of knobs which are easier for people to use. So far, no complaints (has been a couple of months). In the old ones, people kept jamming nickels and pennies in, but this one just lets them pass through with no issue.