Bobrick B-518116x28 White, Vinyl-Coated, Folding Bathtub Seat
Folding In-Tub Bathtub Seat is used to sit on while showering. Seat folds up against wall when not in use. Vinyl-coated seat has a frame constructed of zinc-plated 3/4" steel tubing with white, vinyl ,antibacterial, warm-to-the-touch coating thickness.
Seating area is 15" (336mm) wide by 28" (711mm) in length to rest on end of bathtub.
Requires one hand operation to manually lower to horizontal position for use or to raise for departure and arrival.
Flanges hold Seat in upright position until released by pulling the top of the Seat away from the wall.
Complies with accessible design guidelines (including ADAAG in the U.S.A.).
Measurement Diagram:
| Installation Type: | Wall / Surface |
| Frame Material: | Zinc-Plated Steel |
| Seat Material: | Nylon |
| Capacity: | 451 lbs |
| Operation: | Fold-Up |
| Overall Dimensions: | 17 - 5/8" Wide x 5" Tall x 28" Deep |
| Net Weight: | 16.65 lbs |
| Shipping Dimensions: | 30" Length x 20" Width x 4" Height |
| Shipping Weight: | 14.5 lbs. |
| Manufacturer Model No.: | B-518116 x 28 |
| UPC / GTIN: | 716954012043 |
| Country of Manufacture: | Italy |
| Warranty: | 1 Yr. Manufacturer's Limited |
Architectural Specifications:
Vinyl-coated Folding Bathtub Seat shall have a frame constructed of zinc-plated 3/4" steel pipe 1/10" (2.5mm) wall thickness, 1/8" (3mm) white vinyl antibacterial, biocompatible, and warm-to-the-touch coating thickness, 1-5/16" (33mm)outside diameter. Seat shall be 15" (380 mm) wide, polyamide 6 with glossy finish slats on top and bottom surfaces. Bathtub Seat shall be equipped with two Mounting Flanges constructed of stainless steel Inox Type 304, 1/8" (3mm) thick wall plate with four mounting bolt locations for 3" (75mm) long 5/16" hex-head lag bolts and polyamide 6 flange cover. Seat shall remain in upright position when not in use. Bathtub Seat shall comply with accessible design guidelines (including ADAAG in the U.S.A..).
Product Group Variations: