Excel XLERATOR ECO Part 1411E Sub-Assembly On Wall Plate
 | Does NOT include the cover. This unit is high voltage which requires additional wiring versus a standard voltage 110-120V dryer. Check with your electrician if you're not sure. |
Your XLERATOR is running rough, or not drying as quickly as it used to? But the cover is still good? Save money and order a sub-assembly!
Excel OEM full sub-assembly including all parts except the cover. Surface mount. Can be used with any XLERATOR cover.
This is an ECO model which means it does not have a heating element and consequently uses much, much less power. Note that the air is still a little warm as it flows through the motor.
- 208-277V, 50/60Hz, 2.3A
- 80% Less Energy Than Conventional Dryers, ONLY 500 Watts!
- 95% Cost Savings vs Paper Towels
- Made in USA Certified®
- 3-Year Limited Warranty
| Cover: | None (works with any pre-existing XLERATOR cover) |
| Mount: | Surface Mount, Optional Recessing Kit available (XLP-40502, purchased separately) |
| Reported Dry Time: | 8 Seconds |
| Nozzle: | Concentrated Single Port, 0.8" Diameter, for fastest drying. |
| Activation: | Automatic (infra-red sensor) Touch-Free |
| Power: | 208-277V 50/60Hz, 500 Watts |
| Motor: | High pressure curved brush type, extended life. |
| Fan: | Thermally protected, series commutated, through-flow discharge vacuum motor/blower (5/8 hp / 20,000 rpm) |
| Air Speed: | 19,000 LFM |
| Heating Element: | None |
| Filter: | Coarse metal mesh filter (washable) |
| IP Rating: | IPX3 (Water Ingress Level 3) WITH COVER INSTALLED |
| Overall Dimensions: | 11-7/8" Wide x 12-11/16" Tall x 6-11/16" Deep (WITH COVER INSTALLED) |
| Shipping Dimensions: | 15" Length x 14" Width x 10" Height |
| Shipping Weight: | 8.3 lbs. |
| Warranty: | 3 Year Manufacturer's Limited |
| Country of Manufacture: | USA |
| UPC / GTIN: | Not published |
| Additional Comments: | Adjustable motor speed and sensor range |